wafer iconArchived News

Tanner EDA Acquired by Mentor Graphics
18 May 2015

Mentor Graphic Corporation has acquired Tanner EDA. When questioned by Bryon Moyer of EE Journal Robert Hum from Mentor is quoted as saying "Mentor Graphics understands that Tanner EDA is unique, due both to its products and its culture. … Read full story

Tanner EDA Finalizes Process Design Kit for Use with ON Semiconductor's I3T50 and I3T80 Intelligent Interface Technology Foundry Processes
28 Oct 2014

MONROVIA, California – October 28, 2014 – Tanner EDA, the catalyst for innovation and leader for design, layout and verification of analog and mixed-signal (A/MS) integrated circuits and ASICs, has released a fully customized process desi… Read full story

Integrated EDA Tool Suite from Tanner EDA, Incentia and Aldec Helps ASIC Design House Lower Cost and Increase Efficiency with No Compromise in Performance
29 Apr 2014

Tanner EDA is high performance, low cost, no compromise MONROVIA, California – April 29, 2014 – In today's 'always on', Internet of Things connected world, the demand for high-performance, mixed-signal ASICs continues to grow. Many thousand… Read full story

Tanner EDA Completes Analog/Mixed-signal Flow with Digital Place and Route in Release v16.1 of HiPer Silicon Design Suite
07 Apr 2014

v16.1 adds all-new digital place and route, advanced parasitic extraction and enhanced interoperability with layout tools through OpenAccess MONROVIA, California – April 7, 2014 – Tanner EDA, the catalyst for innovation and leader for design… Read full story

Tanner EDA Contributes Technology to Si2's OpenPDK Coalition
07 Jan 2014

Austin, Texas (January 7, 2014) – Tanner EDA, a division of Tanner Research, Inc. has made a technology contribution to Si2's OpenPDK Coalition which allows for Open Process Specification (OPS) information to be mapped into the OpenAccess databa… Read full story

Tanner EDA Continues Worldwide Expansion: China and Hong Kong
20 Dec 2013

Aerdai to provide sales and support for full-flow analog mixed-signal IC design tool suite and MEMS software MONROVIA, California – December 20, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of an… Read full story

Electronic Design Software Company Teams with UKESF to Promote UK Skills Investment
01 Nov 2013

EDA Solutions has teamed up with the UK Electronics Skills Foundation (UKESF) to source its latest undergraduate intern from one of the top UK universities in microelectronics. The UKESF Scholarship scheme seeks to encourage top electronic… Read full story

Tanner EDA Continues Worldwide Expansion: Australia and New Zealand
03 Oct 2013

Synchlogix to provide sales and support for full-flow analog mixed-signal IC design tool suite and MEMS software MONROVIA, California – October 3, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of ana… Read full story

Tanner EDA Continues Worldwide Expansion: India
03 Oct 2013

ICON Design Automation to provide sales and support for full-flow analog mixed-signal IC design tool suite MONROVIA, California – October 3, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog… Read full story

Tanner EDA Expands Presence in Israel
23 Jul 2013

Beyond Electronics to provide sales and support for full-flow analog mixed-signal IC design tool suite MONROVIA, California – July 23, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed… Read full story

Tanner EDA Sponsors TowerJazz Technical Global Symposium in Japan
16 Jul 2013

Demonstrating design kits and reference flows for rapid and productive design enablement MONROVIA, California – July 16, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integ… Read full story

Tanner EDA at DAC 2013: 25 Years of Driving Innovation for Analog and Mixed-Signal Designers
21 May 2013

Demonstrations Building on the company's 25-year heritage of providing industry-leading price-performance and interoperability, Tanner EDA and its ecosystem of partners has added greater flexibility to Tanner EDA solutions. HiPer Silicon v16, T… Read full story

Tanner EDA Joins ARM® Connected Community®
08 May 2013

MONROVIA, California – May 8, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs), today announced that it is a new member in the ARM Connected Communi… Read full story

EDA Solutions at DATE 2013: Demonstrating New HiPer Silicon™ from Tanner EDA
13 Mar 2013

Company to demonstrate Version 16 of HiPer Silicon™ full-flow analogue and mixed-signal design suite from Tanner EDA, in addition to digital synthesis and digital simulator tools from Incentia and Aldec, respectively. EDA Soluti… Read full story

EDA Solutions at Image Sensors 2013
13 Mar 2013

Company to demonstrate latest advanced image sensor design tools including Version 16 of HiPer Silicon, the full-flow analogue and mixed-signal design suite from Tanner EDA EDA Solutions, sole representative in Europe for Tanner EDA and Inc… Read full story

Tanner EDA Provides Leap in Design Team Productivity with Release v16 of HiPer Silicon
05 Mar 2013

v16 offers unprecedented interoperability and performance with addition of OpenAccess database, new features and significantly greater functionality MONROVIA, California – March 5, 2013 – Tanner EDA, the catalyst for innovation for the de… Read full story

Tanner EDA Appoints Jeff Thayer as Director for International Sales
20 Feb 2013

Experienced EDA sales executive to oversee expanding international customer base MONROVIA, California – February 20, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal (A/MS) int… Read full story

EDA Solutions at Analog Circuit Design Conferences in Germany
18 Feb 2013

Company to demonstrate full mixed-signal design flow including tools from Tanner EDA, Incentia and Aldec EDA Solutions, sole representative in Europe for Tanner EDA and Incentia Design Systems, is exhibiting at two analog electronics design… Read full story

Integration of Tanner EDA and Incentia Tools Increases Capabilities and Productivity for Analog and Mixed-signal IC Designers
13 Feb 2013

HiPer Silicon AMS extends Tanner EDA's design, layout and verification toolset to design entry, simulation, debugging, static timing and synthesis for digital circuits MONROVIA, California – February 13, 2013 – Tanner EDA, the catalyst fo… Read full story

Analog Bits Continues to Drive Innovation Using Tanner EDA Schematic Capture and Layout Tools
08 Jan 2013

MONROVIA, California – January 8, 2013 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs), has been providing schematic capture and layout… Read full story

Tanner EDA Grows Revenue, Technology Partnerships and Customer Base for Fiscal 2012
08 Nov 2012

25th year sees continued revenue growth, 149 new customers, and new offerings with partners across the EDA ecosystem. Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated cir… Read full story

Tanner EDA Sponsors MEMS Partner Event in Israel
24 Oct 2012

Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs), and Israeli distributor New ARTech Technologies will hold a day-long conference on micro-electro-mechanical systems… Read full story

EDA Solutions at Ultra Low Power Developer Forum Demonstrates Mixed-Signal Flow including Tools from Tanner EDA, Incentia and Aldec
04 Oct 2012

EDA Solutions, sole representative in Europe for Tanner EDA and Incentia Design Systems, is exhibiting at the 'Design & Elektronik' Developer Forum on Ultra Low Power in Munich, Germany, on October 10, 2012, at the Holiday Inn (Munich - City Cent… Read full story

Tanner EDA Releases HiPer Silicon(TM) v15.23
24 Sep 2012

Front-end design capabilities bolstered with HiPer Simulation(TM) AFS and enhanced T-Spice MONROVIA, California - Sept 24, 2012 - Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal in… Read full story

X-Ray Imaging Applications to Benefit from Development of Wafer-Scale CMOS Imaging Technology
19 Jun 2012

Advanced sensor for medical imaging applications developed by the Science and Technology Facilities Council's Rutherford Appleton Laboratory Highly innovative imager enabled by advanced analog design tools from Tanner EDA and leading-edge CMO… Read full story

Tanner EDA Announces Tanner Analog FastSPICE
26 May 2012

Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs) and MEMS devices, announces the availability of Tanner Analog FastSPICE (T-AFS), offering the Berkeley Design Auto… Read full story

Tanner EDA to Preview HiPer Simulation A/MS and Participate in Panel on Analog Productivity at DATE 2012
07 Mar 2012

MONROVIA, California - March 6, 2012 - Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs), will preview HiPer Simulation A/MS and participate in a panel on analog pr… Read full story

EDA Solutions Celebrates 10 Years in Delivering Analogue and Mixed-Signal Design Solutions
28 Nov 2011

EDA Solutions, sole representative in Europe for Tanner EDA, Incentia Design Systems and MOSIS, is celebrating its 10th birthday this month. The company commenced operations in November 2001, originally based in Southampton, UK, as sole represent… Read full story

EDA Solutions Appoints Steve Attfield as Sales Manager for Northern Europe
18 Nov 2011

EDA Solutions, sole representative in Europe for Tanner EDA and Incentia Design Systems, has appointed Steve Attfield as Sales Manager for Northern Europe, covering the UK, Benelux and the Nordic countries. Attfield has more than 20 years exper… Read full story

Mixed-Signal ASIC Design Workshops for Incentia and Tanner Design Tools
04 Oct 2011

EDA Solutions, sole representative in Europe for Tanner EDA and Incentia Design Systems, today announced a series of workshops in Germany, Belgium and the UK, on mixed-signal ASIC design, based on advanced ASIC design… Read full story

EDA Solutions Sole Representative in Europe for Incentia Design Systems
04 Oct 2011

EDA Solutions, sole representative in Europe for Tanner EDA, today announced it has been appointed as the sole representative in Europe for Incentia Design Systems Inc., a leader in timing analysis, logic synthesis and design closure solutions for… Read full story

Nordic office signals continued expansion for Tanner EDA in Europe
15 Sep 2010

EDA Solutions, Tanner EDA's sole representative in Europe, has continued its expansion with the opening of an office in Stockholm, Sweden to serve customers in Denmark, Finland, Norway, and Sweden. The office is headed by technology veteran Johan … Read full story

EDA Solutions and Europractice host mixed-signal ASIC design training course
03 Sep 2010

EDA Solutions and Europractice will be running a practical training course on Europractice Design Kits for the latest Tanner IC Design Tools. The two day course will be held in four European locations this Autumn and will cover various aspects of … Read full story

Version 15 of Tanner EDA's HiPer Silicon full-flow design suite available at EDA Solutions
29 Jun 2010

v15 includes new database for simulation data, new waveform viewer, enhanced signal analysis platform, and breakthrough tool for device and structure generation Now available from EDA Solutions is version 15 of Tanner EDA's HiPer Silicon full-flo… Read full story

Tanner EDA and IC Mask Design Collaborate to Accelerate Analog Layout Design
10 Mar 2010

Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs) and IC Mask Design, an industry leader in the provision of physical design services to the global semiconductor in… Read full story

ASIC & MEMS Design and Production Workshop
13 Jan 2010

Workshop on Affordable ASIC & MEMS Design and Production for Small and Medium Enterprises (SMEs) With foundries offering semiconductor technologies today at affordable prices, ASIC (Application Specific Integrated Circuit) & MEMS (MicroEl… Read full story

TowerJazz and Tanner EDA Announce Process Design Kit Collaboration
19 Nov 2009

NEWPORT BEACH and MONROVIA, Calif., November 19, 2009 - TowerJazz and Tanner EDA today announced a joint initiative to develop Process Design Kits (PDKs) for analog/mixed-signal (A/MS) designers using Tanner EDA's HiPer Silicon™ software. This c… Read full story

Tanner process design kit support for X-FAB's 0.18µm technologies
03 Nov 2009

EDA Solutions announces that X-FAB has released two 0.18µm process design kits (PDK) for Tanner Tools Pro on X-TIC, X-FAB's online technical database. Tanner Tools Pro is the software suite for the design, layout … Read full story

EDA Solutions and Europractice to host mixed-signal ASIC design workshop
04 Sep 2009

The two-day seminar will be held at Fraunhofer IIS Erlangen, Germany on 14th - 15th October 2009. The workshops include practical training on Europractice Design Kits for the latest Tanner IC Design Tools. View further details and apply online … Read full story

New autorouter and layout device generator
27 Jul 2009

EDA Solutions announces the availability of version 14.10 of Tanner EDA's Tanner Tools Pro and HiPer Silicon design software, including a new interactive autorouter, SDL Router, and a layout device generator, DevGen. Both these additions increase… Read full story

LFoundry Releases Low Power and RF 0.15 μm PDK
02 Jun 2009

New PDK supports analog design flow from schematic entry and simulation, through schematic-driven layout with parameterisable cells, to full custom layout and verification. Landshut & Munich, Germany (June 2nd, 2009) - LFoundry today announce… Read full story

EDA Solutions and Cascoda partner to provide design support
01 Apr 2009

EDA Solutions, the exclusive European representative for Tanner EDA, and Cascoda, a semiconductor design company, announce a partnership to provide design support to Tanner EDA customers in Europe. The agreement will enable EDA Solution… Read full story

First 64-Bit Physical Verification Tool Suite on Windows (x64) Platform
02 Oct 2008

Tanner EDA Delivers First 64-Bit Physical Verification Tool Suite on Windows (x64) Platform Monrovia, CA - September 16, 2008 - Tanner EDA, the world leader in PC-based analog and mixed-signal IC design tools, today announced the immediate avail… Read full story

External Verification Interface (EVI) available with Tanner Tools v13.11
02 Oct 2008

Tanner EDA Provides Customers with Seamless Integration to Mentor's Calibre Verification Suite Monrovia, CA - September 18, 2008 - Tanner EDA, the world leader in PC-based analog and mixed-signal IC desi… Read full story

HeadlineTanner tools chip in to successful tape out
06 May 2008

A Philips Research Labs project group has successfully completed its first two mixed signal IC designs using the suite of EDA tools from Tanner EDA. Both devices were proved to be 'right first time', and are now undergoing further verification for… Read full story

Tanner EDA upgrades chip design tool suite
10 Mar 2008

Tanner Tools V13.0 cuts development time in simulation, layout and verification for analog and mixed-signal ICs and MEMS devices Tanner Tools V13.0 is a significant upgrade to Tanner EDA's Windows-based tool suite for analog and mixed-signal IC a… Read full story

EDA Solutions and Europractice to host mixed-signal ASIC design training seminars at DATE 2008
14 Feb 2008

EDA Solutions will also showcase Tanner Tools V13.0 and MOSIS process additions on stand F35 in hall B0. EDA Solutions and the Fraunhofer Institute, one of the Europractice Support Centres, will co-host a program of training seminars on Europract… Read full story

EDA Solutions scoops NMI Training and Education Award
14 Nov 2007

Southampton-based electronic design automation specialist, EDA Solutions, has won the National Microelectronics Institute (NMI) 2007 award for Commitment to Training and Education. The award was presented to Paul Double, Managing Director of EDA S… Read full story

IBM's CMOS image sensing technology now available at low cost through MOSIS
21 Sep 2007

MOSIS, a provider of low-cost prototyping and small volume production services for custom ASICs, announces availability of IBM's image sensing technology (CIMG) through its multi-project wafer (MPW) service. This means that companies working on im… Read full story

IC Mask Design selects Tanner EDA tools for layout training
09 Jul 2007

IC Mask Design, a Limerick-based (Ireland) company that offers chip layout services and training to companies throughout Europe and the US, has selected Tanner's L-Edit layout tool for its training courses. Established in 2002, the company has tra… Read full story

Tanner's multi-threading analogue simulator cuts run time by up to 80%
18 Apr 2007

At DATE 2007 Tanner EDA gave its first demonstrations of multi-threading analogue simulation capability of its T-Spice simulator for analogue and mixed-signal chip designs. This capability has been developed for use on computers with multiple proc… Read full story

MOSIS delivers economical access to IBM 65nm process
18 Apr 2007

MOSIS, a provider of low-cost prototyping and small volume production services for custom ASICs, announces access to IBM�s 65nm silicon foundry process through its multi-project wafer (MPW) service. The service means that system-on-chip designer… Read full story

Tanner adds 3D parasitic extraction to L-Edit
18 Apr 2007

Tanner EDA has added hierarchical 3D resistance and capacitance (RC) extraction capabilities to its L-Edit chip layout tool for analogue and mixed-signal design. The new tool, HiPer-PX, was demonstrated for the fir… Read full story

Accelerated system-level MEMS development with SoftMEMS
09 Apr 2007

EDA Solutions (Southampton, UK), the exclusive European representative for Tanner EDA and MOSIS multi-project wafer services for IC fabrication, has signed a representation agreement for Germany, the UK, Benelux an… Read full story